industrial-wastewater-treatment-supplier-in-uae
Water Purification in Nigeria

Water Purification in Nigeria: A Practical Guide to Choosing the Right System


Do you have problems with borehole water causing staining, cloudy surface water, bad taste or smell, or unsure whether the water is suitable for its intended use? Selecting a purification method without determining the real issue with the water may result in an excess number of treatment steps, inefficiency, and unnecessary expenses. Here, we tell you how to purify water in Nigeria, starting with an analysis of its source and testing in a lab.


Identify the Water Source First

Not every purification process starts with the filtration equipment. First thing first - the water source. There are various sources of water in Nigeria, such as boreholes, wells, rivers, surface lakes or municipal supply; every source requires a specific treatment process. Water that is extracted from underground might have some mineral content, iron, manganese, hardness or other natural contaminants. Surface water could vary more in terms of turbidity and microorganism content, especially because of the activity around the catchment area. That's why a water filtration system developed for a certain source would not fit another one. A supplier should therefore assess the source before recommending equipment.


Test the Water Before Selecting Treatment

Water that looks clear does not always mean that it is safe water. There might be microorganisms or dissolved substances in the water, but there would be no colour, taste, or odour change. Water testing in a laboratory will determine the parameters necessary for choosing a treatment process. Based on the origin and use of the water, the test will check for microbiological characteristics, turbidity, pH value, total dissolved solids, electrical conductivity, hardness, iron content, manganese, nitrates, etc. Based on test results, it is necessary to specify equipment. It is especially important for well water supply.


Match Each Treatment Stage to a Specific Problem

Different purification processes perform different functions, so choosing a system simply because it contains several filters is not a sound approach. Sediment filtration can remove suspended particles and reduce turbidity. Activated carbon can help control certain tastes, odours and organic compounds. Water softeners primarily address hardness by reducing calcium and magnesium ions. Microbial risks require appropriate disinfection, which may involve methods such as chlorination or ultraviolet treatment. However, disinfection does not solve every chemical water-quality problem.


Where testing identifies elevated dissolved salts or other constituents that require membrane separation, reverse osmosis (RO) may be appropriate. RO should not automatically be treated as the answer to every water-quality problem because it produces a reject stream and requires appropriate pre-treatment, pressure and maintenance. The objective is to build treatment stages around the contaminants identified in the water analysis.


Give Borehole Water Special Attention

The water from a borehole may seem to be clear and still need some treatment. This is because there could be excess iron or manganese, which could stain the water or make it look or taste bad, or hardness, which could cause the water to form scale deposits in pipes.


These would each need to be treated in different ways. Iron cannot be handled just like sediments, while the hardness of the water cannot be solved using sediment filtration. If the water from the borehole is for drinking, then tests have to be conducted on the microbes.


Calculate the Required Capacity

A purification system must produce enough treated water when it is actually needed. A household, hotel, school, hospital, restaurant and manufacturing facility can have very different water-demand patterns. System sizing should consider daily consumption, peak flow, operating hours, storage capacity and the required treated-water quality.


Oversizing equipment can increase capital and operating costs, while under-sizing can leave users without sufficient treated water during periods of high demand. For commercial and industrial applications, the supplier should explain the proposed flow rate and treatment capacity rather than quoting only the equipment size.


Consider Power and Operating Requirements

The equipment used for treatment may have pumps, pressurised systems, control panels, UV lights, or other power-driven equipment. If there are areas where there is an irregular power supply, then this must be taken into consideration when designing the system to ensure that treatment and pumping are continuous. Running costs can be higher than just the cost of acquisition. Costs such as electricity, filter replacement, membranes, chemicals, regular cleaning, and servicing can add up to the running cost of the system. So, get a schedule for running and maintenance before buying.


Protect Water After Purification

Producing treated water is only part of the process. Storage tanks, pipework and distribution systems can affect the quality of water after treatment. A poorly maintained storage tank or contaminated distribution line can undermine an otherwise effective purification system. Treatment design should therefore consider the complete route from raw-water intake through treatment, storage and final use. This risk-based approach is consistent with WHO drinking-water guidance, which considers water safety across the entire supply chain rather than focusing only on the treatment unit.


Select the System from Evidence, Not Equipment Lists

The right purification system is not necessarily the one with the most filters or the most advanced technology. It is the system whose treatment stages address the actual water-quality problems, required volume and intended application while remaining practical to operate and maintain.


For WATER PURIFICATION IN Nigeria, start with the source, obtain reliable laboratory results, identify the contaminants, calculate demand and then evaluate suitable treatment technologies. Ask the supplier to explain why each treatment stage is included and what maintenance it will require.


If you need a purification system for borehole water, residential use, commercial facilities, institutions or industrial applications, contact our team to discuss your requirements. Share your water source, laboratory test results, required capacity and intended application, and our specialists can help you assess the appropriate treatment approach for your needs.